ñòð.3 SPECIFICATION AND SERVICE DATA 9–3 CHASSIS NUMBER

SPECIFICATION AND SERVICE DATA 9–3 CHASSIS NUMBER

/library/BOOKS/CAR/SsangYong/K100/K100_OML_09.pdf\nSPECIFICATION AND SERVICE DATA 9–3
CHASSIS NUMBER
G23D Engine Chassis number is stamped on the front
The engine number is stamped on the upper right-hand side of the frame member.
rear left-hand side of the cylinder block.
K LHD EN.p Page Adobe PageMaker 6.5K/Win
-06-08, ¿ÀÀü :53
–4 SPECIFICATION AND SERVICE DATA
LUBRICATION CHART
Lubricant Capacity Classification
MB sheet :.1/3 (preferable)
Quality
(API : CG grade or above
Diesel D29ST.5 ~ 9.5 L class**
ACEA : B2, B3 or B4)
Viscosity MB sheet No.1
Engine oil
MB sheet :.1/3
G23D.0 ~ 7.5 L Quality
(API : SJ grade or above
Gasoline class**
ACEA : A2 or A3)
G32D.7 ~ 8.2 L Viscosity MB sheet No.1
D29ST.5 L MB sheet.0,
Engine coolant
G23D.5 L BASF GLYSANTIN G05-11,
(Coolant/Distilled water Mixture)
G32D.3 L HOECHST GENANTIN SUPER /14
Manual transmission oil WD : 3.6 L / 2WD: 3.4 L ATF DEXRON® II
Brake/Clutch fluid (Level must be Brake fluid : approx. 0.7 L
SAE J , DOT or DOT 4
maintained between MAX & MIN level) Clutch fluid : approx. 0.3 L
Power steering fluid.0 L ATF DEXRON ® II, III / Total fluid ATX
Automatic transmission fluid (BTRA M74LE)*.5 L CASTROL TQ
Transfer case fluid Part time:1.2 L / TOD:1.4 L ATF DEXRON ® III
Front & rear Front Tong-IL:1.0 L / Dymos:1.2 L
SAE W/ / API GL-5
axle fluid Rear.9 L
Wheel bearing grease Properly SHELL Retinax “A” grade
Propeller shaft grease - Front/Rear Properly ALVANIA EP#2
* Please contact Ssangyong Dealer for approved alternative fluid.
** In only case not available MB sheet specification API and/or ACEA specification oil may be used, however it would rather recommand
to shorten change interval around %.
K LHD EN.p Page Adobe PageMaker 6.5K/Win
-06-08, ¿ÀÀü :53
SPECIFICATION AND SERVICE DATA 9–5
ENGINE OIL
SAE viscosity classes Engine
The SAE classes (viscosity) should be se- The viscosity should be selected according to outside temperature. Do not switch to a
lected in accordance with the average sea- different viscosity in the event of brief temperature fluctuations.
sonal air temperature.
Applying the SAE classes exactly on the
basis of the outside air temperatures would
necessitate frequently changing the engine
oil. The temperature limits for the SAE
classes should therefore be regarded as
reference temperatures and the actual air
temperature may be higher or lower for a
short period of time.
K LHD EN.p Page Adobe PageMaker 6.5K/Win
-06-08, ¿ÀÀü :53
–6 SPECIFICATION AND SERVICE DATA
SPECIFICATION
All data apply to vehicles with standard equipment. Optional extras may alter some of these data. For more information, please contact
any Ssangyong Dealer.
Model D29ST G23D G32D
Items
Overall length
Overall width
Overall height
Vehicle
dimensions Wheel base
(mm)
Ground clearance
Front
Tread
Rear
Manual
Curb
weight
Automatic
Weight
(kg) Gross vehicle weight
Persons (s/top) (4)
K LHD EN.p Page Adobe PageMaker 6.5K/Win
-06-08, ¿ÀÀü :53